How To Score A Buck Antler

If you score the deer right after you shoot it, this is considered a “green scoring We love to celebrate every hunt and hear the great stories that go with them.

Measuring Antlers 4 Ways to Score a Deer's Rack

Unlike other methods, the boone and crockett method places an emphasis on how symmetrical a deer antler rack is.

How to score a buck antler. I point this out, because score is only one metric, and frankly does not always reflect a buck’s true size, or a hunter’s personal preference in antler characteristics. The wider the spread, the higher your buck is going to score. Killed in cando, sk, 1998 can you guess the score?

Your antlers can’t receive an official boone and crockett score in this condition.[2] x research sourcestep 3, make sure your whitetail deer hunt follows the fair game laws of your state. When we speak of the total score of a whitetail rack you hear folks say 179” or 223”, what does that mean? This is where a lot of guys give their buck a little too much credit, by measuring tine length from the wrong place on the main beam.

If antlers are in velvet, deduct 2% from total score. Since the length from the eye to the tip of the nose is around 8” we can determine that from the tip of the antler back to the “g2” is roughly 16”. The gross antler score is what most people use to rank their deer’s antlers.

Record metric measurements to 0.1 cm. Measure the main beams of the antlers. How to score a buck how to measure a whitetail antler using only safari club international (sci) scoring system.

Also, some information recorded on the b&c score sheet is purely supplemental data that’s used by officials and record books to keep an accurate history of the animal taken. As stated above, symmetry is also a factor that's used to determine the boone and crockett score of deer antlers. Antler score represents a sum of antler lengths, point lengths, circumferences and inside spread measured in inches to the nearest ⅛ inch.

Measure tine length on one side. Once you mount the buck, it will take about 60 days for the antlers to dry out. The app accurately estimates antler size including spread, beam length, tine length, and circumference all to calculate a net and gross score within 3% of the actual score.

What is your best score? From the base of the burr, follow the outside and center of the main beam all the way to the antler tip. This measurement is taken on the outside edge of each antler, starting at the base of the burr.

If there are noticeable imperfections, points will be dedicated away, giving it an overall lower score. To determine the total score of an antler you need not have a degree in calculus, but it probably would help. I personally love mass and prefer it over width or tine length.

Enter all four of those measurements as you go, then repeat on the other antler. Judging from the length of the ear we can safely estimate that the length from the “g2” to the base of the antler is another 7”. For an “official” score, antler trophies need to be measured and scored by a trained and certified b&c measurer.

Often the buck we chose was the buck with the lower score. It usually takes about 60 days to dry the antlers.step 2, make sure the antlers are dry and the skull plate is intact if you want to request an official measuring by a boone and crockett representative. Hover over the tab entitled “big game records.” scroll and select “scoring your.

(score of antler 1 x 2(if antlers are symmetrical)) + (spread) = score of buck. This measurement is taken on the outside edge of each antler, starting at the base of the burr. And unless your trophy measures more than 600 inches (wouldn't that be a nice problem?), trophy tape has you covered.

Man, that's the fun part! This is only necessary if you are trying to make it into the boone and crockett official records.step 3, go to the boone and crockett website. Unfair chase makes your antlers ineligible to be officially scored.

Most of these deductions cover the differences between the circumferences, the left side tines and also the abnormal point measurements. Measure the inside spread of the main beams By taking this shortcut and adding the measurement of the spread credit, you will arrive at a rough estimate of the buck’s score.

Step 1, dry the antlers thoroughly before you try to score them. (see answer by clicking to the next slide) a: Enter the measurements and get the score automatically.

This will give us a beam length total of 23” When measuring in inches, record fractions in 1/8ths of an inch. From the base of the burr, follow the outside and center of the main beam all the way to the antler tip.

Measure the main beams of the antlers. During this time they will shrink as they lose water. Make sure that the tape measure is held parallel to the top of the deer’s head.

The easiest way to calculate the score of your trophy whitetail, mule deer, elk, bear and more. If the buck is relatively symmetrical, you will simply be able to score one antler and multiply it by two. Developed by researchers at mississippi state university’s deer lab, the app accurately estimates antler size including spread, beam length, tine length, and circumference all to calculate a net and gross score.

However, for the best measurements, all deductions must be subtracted from the gross score. [1] x research sourcestep 2, ensure the skull plate is intact and it has not been artificially replaced or repaired. Let us know what your best score is!

The Top 40 Typical and Nontypical Whitetails of All Time

JUST EVERYTHING.This is a 100 REAL ALL NATURAL ANTLER